19
4
Linking 2 programs
It is possible to run 2 programs automatically in sequence. This can be handy
to perform very special functions (like waterproofing outerwear) and add these
to the wash program.
Programming:
First select the program
which will be run last.
Now, press the START-button (S) and
keep it depressed for at least 5 seconds
.
The left display now shows “
Add
”. Now select the program which
will be run
first
.
The right display now shows both linked programs
alternately
: the first to be
run program during the longer time span alternating with the following program
displayed during the shorter time span.
This function is canceled by pressing the START-button (S) again for at least
5 seconds
.
This function
can be combined
with an economy wash, with the functions F1
to F6 and with a programmed start. The
freely programmable stop-function
can
however only be executed during the first program.
Operation:
Press the START-button (S) to start the programs. The central display will show
the remaining time
per program
. The total time of both programs together is
not
displayed
.
The right display
alternately shows
the program in operation (during a longer
time span) and the second program to be executed (during the shorter time span).
After the first program has been run, only the second program number will be
displayed.
