4
v3.0 AB
5.
Test the U-type module functionality
Use a serial port monitor program to test the device functionality.
The open source program "PuTTY" (
) can be used to
test the device manually.
6.
Before starting the session, configure the “Session” via the “Session” menu and
setting the following:
•
Verify the correct COM port is populated in the “Serial line” input box
•
Manually set “Speed” to 115200
•
“Connection type” should be set to “Serial”
The Digital U-Type has a boot-up time of ~5 seconds before you can communicate
with it. It will not respond to the laser enable pin during this time.
Image 3: “PuTTY” Session Configuration