9
4 Using Your Phone
4.1 Powering on/off
Press and hold
the End/Power key
to switch your phone on or off.
1.If there is no SIM card, SIM card is defective, or SIM card contact is loose,
you will be prompted with a warning after powering on, Shut down and check
your SIM and its installation.
2. If inserted GSM SIM card only into the phone, meanwhile phone code and
PIN code is turned on. When switched on, after entering the PIN code and phone
code, the phone enter the standby mode by the current SIM.
After switched on, the phone will automatically search the network.
If the phone detected authorized network, the screen will display the
network name and signal strength If no authorized network is found the
phone can only make emergency calls or use non-communications features.
4.2 Making a Call
4.2.1Making a domestic call
In standby mode, press the corresponding numeric keys to enter the phone
number, press
the Right soft key
to delete erroneous inputs; press
the Left soft
key
or press
the Green key
to make a call when done to connect.
4.2.2 Dialing Fixed/Land Line Extensions
You cannot directly get through some fixedline extensions, and need to dial the
telephone exchange or trunk line first and then press and hold [0] key to convert
until “P
/W
” appears on the screen. And then dial the extension. You can dial
fixed extensions according in the following order:
+ Country code - Area code - Trunk line number- P/W - Extension number
4.2.3 Making an International Call
Summary of Contents for Shark
Page 1: ......
