User Programming
7008/16/24D User Guide | User Programming 09
Saving your name to your phone
1. Press the
[TRANS/PGM]
button and dial
74
.
2. Enter your name as per the Character Entry chart
3. Press the
[HOLD/SAVE]
button to save your name to the system memory
Storing Personal Speed Dials
1. Press the
[TRANS/PGM]
button.
2. Press the
[SPEED]
button.
3. Dial the number of the speed dial bin you 000-099
4. Enter the required speed dial number and press
[HOLD/SAVE
]. (You do not need to enter
9 for an outside line).
5. Enter the name as per the character entry chart on page 23.
6. Press the
[HOLD/SAVE]
button.
Storing information under a flexible button
1. Press the
[TRANS/PGM]
button and select the button you wish to assign.
2. Assign the button in on of the following ways:
a) Press the
[TRANS/PGM]
button followed by a user programming code .
b) Press the
[SPEED]
button followed a speed dial number.
c) Enter the relevant extension number.
3. Press the
[HOLD/SAVE]
button.
General Functions
7008/16/24D User Guide | General Functions 06
Call Pickup (Directed)
1. Dial 7 followed by the extension number of the station that is ringing (or group number if a
group of phones is ringing).
2. You will then be connected to the calling party.
(Code can be saved under a flexible button).
Call Pickup (Group)
1. Pick up your handset or press the
[SPEAKER]
button.
2. Dial
566
.
3. You will be connected to the caller.
(Code can be saved under a flexible button).
On the 7016D and 7024D you can press the 1st Silver Key with
PICKUP
above it on the
display for both types of Pickup.
Transfer (Screened)
1. Whilst connected to a caller press the
[TRANS/PGM]
button. (For 7016D or 7024D you can
press the 1
st
Silver Key with
TRANS
above it on the display.
2. Dial the appropriate extension number or press a flexible button that has been assigned
with a station number.
3. Wait for the called party to answer, announce the call and Hang Up
Transfer (Unscreened)
1. Repeat steps 1 to 3 as described above.
2. Hang up on ringing without announcing the call.
Using Speed Dial Numbers
1. Press the
[SPEED]
button.
2. Dial the required speed dial number.
Making a Page
1. Lift receiver or press the
[SPEAKER]
button.
2. Dial the required paging code (see below).
3. Hang up once you have finished the page.
501-535 – Internal Page Zone
543 – Internal All Call
544 – Meet Me
545 – External Zone 1
546 – External Zone 2
547 – External Zone 3
548 – External All Call
549 – All Call
(Page zones will need programming).
