IPGARD SDVN-16S, User Manual

Page: 12 / 15

Advanced 8/16 Port DVI-I Secure KVM Switch 12
User Console Interface – Display LED:
User Console Interface – CAC LED:
Front Panel – Port Selection LED’s:
Front Panel – CAC Selection LED’s:
Front Panel - Port and CAC Selection LED’s:
EDID Learn - Front Panel LED’s:
All LED’s are turned on for 1 second. Then:

Port 1 LED’s will flash until the end of the process.

Port 2 LED’s will flash until the end of the process if a second video board exists (Dual-head KVM).
# Status Description
1 Off Monitor is not connected
2 On Monitor is connected
3 Flashing EDID problem – Learn EDID to fix the problem
LED’s BEHAVIOR
# Status Description
1 Off CAC is not connected
2 On Authorized and functional CAC is connected
3 Flashing Non-CAC peripheral is connected
# Status Description
1 Off Non-selected port
2 On Selected port
3 Flashing EDID learn in process
# Status Description
1 Off CAC port is disabled or non-selected port
2 On CAC port is enabled
3 Flashing EDID learn in process
IMPORTANT!
If all the Front Panel LED’s are
flashing and the buzzer is
beeping, the KVM has been
TAMPERED with and all func-
tions are permanently disa-
bled. Please contact IPGARD
technical support at
support@IPGARD.com .
If all Front Panel LED’s are on
and not flashing, the POWER
UP SELF TEST has failed and
all functions are disabled.
Check if any of the front panel
port selection buttons are
jammed. In this case, release
the jammed button and recy-
cle the power. If power up self
test is still failing, please con-
tact IPGARD technical support
at
support@IPGARD.com .
# Status Description
1 All Flashing
Connected peripheral to keyboard or
mouse console ports is rejected