IPG USA 2324-TB, Operation Manual

Page: 16 / 66

UDM10006-05 USA 2324 TB Manual 16
UM 176TW / UM676TW
OPERATING INSTRUCTIONS
Once the Tape Heads, (both bottom and top) have been loaded with tape and threaded
(refer to the appropriate Tape Head manual for loading and threading instructions) the
machine is ready to process RSC cartons. The following instructions are presented in
the
order recommended for processing cartons successfully through the USA 2324 TB
Carton Sealing machine.
1-
Loosen the Arching Side Guide locking handle and open the Arching Side Guides
completely (Push to outside of machine).
2- Loosen locking handle on the Top Tape Head Assembly and raise it until it clears the
new carton.
3- Place a new carton between the Side Guides under the Top Tape Head Assembly, and
close against carton under moderate pressure. (DO NOT CRUSH CARTON)
4- Lower the Top Tape Head Assembly until it rests on the carton and tighten the
locking handle.
5- Loosen the Top Compression Guides locking handles (x2) and close against the
carton enough to keep the slot in the center closed while taping and tighten the
locking handles to secure the guides against the carton.
6- Remove the carton.
7- Check to insure all personnel are clear.
8- Release the E-stop switch and start the machine with the green start button.
9- Feed the closed carton to the machine.
WARNING: Ensure that the operator’s hands are away from the contact area
between the Top Tape Head Box and the carton.