IPG Interpack USC 2024-BB 3, Operations Manual & Parts List

Page: 34 / 56

USC 2024-
BB 3” UNIFORM SEMI-AUTOMATIC CASE SEALER
Set-Up Procedures
4-9
4.9 R
EMOVING
T
APE
H
EADS
P
RIOR TO
T
APE
L
OADING
4.9.1 Removing Upper Tape Head
1. Slide tape head lock upwards to unlock the tape head (refer to Figure 4-10).
2. Slide tape head toward the inlet end of machine and lift out of rear slot.
Figure 4-9 Removing Upper Tape Head
4.9.2 Removing Lower Tape Head
1. Lift the upper tape head bridge by turning the height adjustment handle clockwise.
2. Gripping the stationary cross shafts, lift the tape head straight up and out of the rear slots.
3. Slide the tape head toward the front end of machine, then lift the tape head straight up and out of the
slot.