7.4.
Save/load
1. The current recording is saved in the selected path and then listed in the list (point 3)
2. The selected recording (point 3) is deleted
3. Selection of the desired recording - affects the elements mentioned here as well as the play back behavior
4. Creates an additional caption in the selected recording slot when saving
5. Basic parameters for video export
Quality: The file size of the video increases with higher quality.
Frame rate: Play back speed for a video can be preset here.
6. Start of video export, the path selection and entering of a name takes place in the displayed dialog box.
7. Switch between views (see images)
8. The recordings are saved in the standard path
9. The recordings are saved in a custom path
10. The custom path can be set here
The recordings are no longer saved as individual images but as "pcr" files as of version 4.0. To play back old recordings,
there is an option to convert them into the new data format. This option can be found in <Advanced settings>.
The recordings are no longer saved as individual images but as "pcr" files as of version 4.0. Recordings already stored
as individual images can be selected by clicking on <Convert recording> and converted into the new file format.
1
2
3
7
4
6
5
8
9
10
7
1
MANUAL • Subject to alteration! Version:
September 2019
ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena
│
Tel +49 2351 9365-0 • Fax +49 2351 9365-19
│
[email protected] • www.ipf-electronic.com
10
