Attention!
Do not expose the system to magnetic fields. Any direct contact of the
magnetic strip with magnetic fields (e.g. adhesive magnets or other permanent
magnets) is to be avoided. Sensor movements during power loss are not cap-
tured by the follower electronics.
Mounting examples
Mounting with chamfered ends (fig. 2) is not recommended unless the strip is installed in a safe
and protected place without environmental influences. In less protected mounting places
the strip may peel. There we recommend mounting accord. to fig. 3 and 4.
Mounting in a groove (fig. 5) best protects the magnetic strip. The groove should be deep enough
to totally embed the magnetic strip.
MANUAL
• Subject to alteration! Version:
Juli 2016
ipf electronic gmbh
• Rosmarter Allee 14 • 58762 Altena
│
Tel +49 2351 9365-0 • Fax +49 2351 9365-19
│
www.ipf-electronic.com
3
