Changing Orientation
18
Changing Orientation
You have several ways to change the orientation of your image:
• Change the orientation of the document/subject –
You may find it easiest to simply change the
orientation of the subject you are capturing: 90° in either direction or turning 180° “upside down.”
• Use the Swivel Head –
Ziggi-HD's camera head is expressly designed to give you an easy way to
alter orientation. From its fully-extended position, Ziggi-HD can be swiveled 180° clockwise and 90°
counterclockwise. Find the position that works best for yourself and your subject. For example, if you
are giving a presentation and need access to the subject for a hands-on demonstration or to frequently
change its position, you might consider moving the stand to one side of the subject—and changing
orientation through the swivel head accordingly—so that the stand does not get in your way.
• Mirroring –
in the Camera mode, the Mirror tab allows you to flip the image horizontally, vertically,
or both. Mirroring defaults to Off (no mirroring). “Horizontal” flips the image on a vertical axis going
through the center of the image, while “Vertical” flips the image on a horizontal axis going through
the center of the image. The tab will indicate H (Horizontal), V (Vertical), or H + V if both types of
mirroring are being applied.
Set-up item to be captured
Select the Mirror tab
No Mirror
Horizontal Mirror (H)
Hori
Vertical (H+V)
Vertical Mirror (V)
Demonstrating swivel head
and the degrees to which it can
swivel
Before and After of changing the position of a document under Ziggi
