iPECS eMG800
Hardware Description and Installation Manual
Issue 1.8
70
4.7.2
Rack Mount Wiring
To dress wiring for a Rack mount installation,
1)
Ensure all boards are installed and that wiring is complete.
2)
Using the supplied Cable Ties, tie all wiring cables and Power cord (if desired) together in a neat
bundle.
3)
Using the supplied Cable Ties, tie the bundled cables using holes in the 19” Rack.
4)
Dress the cable down the rack back to the wiring termination point.
Figure 4.7.2-1 Rack Mount Cable Dressing
