Manual Tuning :
When the cursor appears an adnormal shifting or shaking .
Please do the following steps :
1
.
Please place the devise flat on the table until the cursor stabilized .
2
.
Initialization
-
press and hold ESC
+
G keys for around 3 seconds
until the LED
-
flashing lite off .
Auto
-
Tuning
A
.
The Cursor may be drifted or shaking due to sudden voltage or
temperature changed. Please run the Auto
-
tuning. Place the devise
flat on the table around 5 seconds, the cursor should be stay and
recovered from shaking.
B. The Cursor may stop or no response during devise power on.Run the
Auto
-
tuning. Place the devise flat on the table for around 5 seconds,
the cursor should be re
-
activated
.
C.The Devise is able to operate bidirectional
(
horizontal
or
vertical
)
by
press and hold ESC
+
FN keys simultaneously for 3
-
5 seconds. If the
cursor is not effectively response, please run the auto
-
tuning
.
Place
the devise flat on the table for around 3
-
5 seconds
,
the devise should
be auto
-
adjusted to the commands in selecting of either working
horizontally or vertically.
FQA
