3.
Set Up Your WiFi Network
Note
: PoE supply is used as an example in all the setup instructions below.
Scenario 1: Set up WiFi network without a management device for IP-COM AP
Tip
:
Connect one AP to your PoE switch first. After configuring the AP, connect another AP, perform
❸
,
❹
, and
on it, and so on.
❶
Connect devices
Connect your AP to a PoE port of the PoE switch using an Ethernet cable. Refer to the following figure for detailed
connection.
After finishing connection, ensure that the AP’s LED indicator blinks and the lower-right network icon on your computer
is not displayed
.
LAN
WAN
Uplink
