29
NTP Network Timing
As for this method, the AC will automatically synchronize its system time from the time server on the Internet.
Configuration Steps
❶
Time Zone:
Select your time zone.
❷
NTP Network Time:
Check the
Enable
box.
❸
Sync Interval:
Select the sync interval (recommend: 30 minutes).
❹
Click
OK
.
Note:
To use the NTP Network Timing, you need to verify that the AC is connected to the Internet.
The way for the AC to access the Internet: click
Manage AC>Network Setting
to configure its IP address, subnet
mask, gateway and DNS server.
Manual Setting
Configuration Steps
❶
NTP Network Time:
Uncheck the
Enable
box.
❷
Click
Synchronize with PC time
to copy time to the AC (You need to verify that your PC time is correct.).
❸
Click
OK
.
Tips:
When the AC is disconnected from power supply, time info will be lost.
When NTP Network Timing enabled, the AC will connect to the Internet to synchronize with the Internet time.
Only when the AC’s system time is correct, can log and AP warning recording time be correct.
Summary of Contents for CW1000
Page 1: ......
