32
3 Advanced Settings
possible channel for your wireless network to operate on.
TX Power ---
Define the maximum average transmitted output power (in dBm) of the device.
To specify the output power, use the slider to adjust the output power. Transmitted power
regulations differ in different countries.
Bandwidth ---
Display the bandwidth of the radio channel. You can use this option to control
the bandwidth occupied by your link.
Extension Channel ---
This is used to ensure radio frequency for 802.11n devices on the
network.
AP Isolation ---
When this function is enabled, wireless clients connected to the same SSID
won’t be able to communicate with each other, which can enhance wireless network security.
TX Rate ---
Define the data rate (in Mbps) at which the device should transmit wireless
packets. You can fix a specific data rate between MCS 0 and MCS 7. Do not change the
default setting “Auto” unless necessary. If you select 20 MHz Channel Width, the maximum
data rate is MCS 7 (65 Mbps). If you select 40 MHz Channel Width, the maximum data rate
is MCS 7(150 Mbps).
Advanced
Click
Wireless > Advanced
to configure advanced wireless settings. If you are not familiar with
these settings, keep the default settings unchanged.
Summary of Contents for AP615
Page 1: ...i 1 Product Overview...