EN
28
vacuum head. Turn the switch on.
6. Noise
7. Blower feature (Isy only)
6.
Remove the filter
7.
Insert the new filter into the filter
frame and place it on the head
8.
Fix the 4 screws. Do not over
tighten the screws.
9.
Check the filter is properly fixed
and the sealing between head and
filter frame is secured.
Repair or service of electrical
components such as cord or
motor, must only be carried out
by an authorized service centre.
If the machine does not start (AC Isy)
•
Check that the plug is correctly
fitted to the wall socket.
•
A fuse in the building may have
blown and needs to be changed.
•
The cord or plug may be
damaged and must be repaired
by an authorized service centre.
Reduced suction power
•
The tank (2) may be full and
needs to be emptied, see
instructions.
•
The filter (11) can be blocked
and have to be cleaned, see
chapter 3.2
•
The hose or nozzle may be
blocked and needs to be
cleaned.
Values measured according to :
EN 60704 - 1 (1997) / EN 60704 -2 - 1
(2001) rules.Measurement A for the
sound pressure level of the machine
is <80dB(A) Under unfavourable feed
conditions, the appliance may cause
temporary drops in voltage.
Push hose into blower port placed on
the
5. Trouble shooting