36
Intervel:
(ii)
For example, if you select "10 sec" here, once the motion is detected
and action is triggered, it cannot be triggered again within 10 seconds.
Based on the schedule:
(iii)
When the option box is ticked, only during the selected schedule time
the motion detection is enabled. That is, for example, the 11th hour of
Monday has not been colored in the schedule table, then no action will
be triggered even the camera detects motion during 11:00~12:00 on
Monday.
Record File
b
.
Choose one of the format, AVI or JPEG.
Record Time Setting
c.
Set up the video recording time for Pre Alarm and Post Alarm when
motion is detected, I/O, or other devices is triggered.
Note: Pre/Post Alarm record time is base on record time setting and
restricted to IP Cam built-in Ram memory. If the quantity of data is too huge
or video quality too high, recording frame might drop or decrease on post
alarm recording time.
Network Dis-connected
d.
To avoid video loss, the camera will start to save the video to local
SD card when it detect no network connection. The video recording will
continuously be saved into SD card and divided into every 10 minutes a file
until the network is reconnected successfully. The oldest file will be deleted
if the capacity of SD card is full.
This function is only enabled under wire connection.
