IOtech Personal488 User Manual Download Page 113

Page: 113 / 150

Personal488 for Windows 95/98/Me/NT/2000

04-10-01

API Reference 6-45

Remote

Syntax

INT WINAPI Remote(DevHandleT devHandle);

devHandle

refers to either an interface or an external device. If

devHandle

refers to an

interface, then the Remote Enable (

REN

) line is asserted. If

devHandle

refers to an

external device, then that device is addressed to Listen and placed into the

Remote

state.

Returns

-1

if error

Bus States

With interface:

REN

With external device:

REN, ATN

•

UNL, MTA, LAG

Examples

errorcode = Remote(ieee);

Asserts the

REN

bus line

errorcode = Remote(scope);

Asserts the

REN

bus line and addresses the

scope

device specified to Listen, to place it

in the

Remote

state

See Also

Local, LocalList, RemoteList

The

Remote

command asserts the Remote Enable (

REN

) bus management line. If an external device is

specified, then

Remote

will also address that device to Listen, placing it in the

Remote

state.

Summary of Contents for Personal488























































































































































Search results

Summary of Contents for Personal488

Reviews:

Brands by name

Popular brands

IOtech Personal488, User Manual

Search results

Summary of Contents for Personal488

Reviews:

Brands by name

Popular brands