Operation
12
- - - -
Input “OLD PIN”:
Initial USER PIN
：
111111
Initial ADMIN PIN
：
111111
❹
“NEW PIN”
(Digits key)
- - - -
Input “NEW PIN”
❺
“CONFIRM”: after new pin is input, input it again to confirm. If the two pins don’t match, it
displays “PIN NOT MATCH”, menu goes back to “NEW PIN”.
(Digits key)
- - - -
Input “NEW PIN” again to confirm
❻
If the two pins match, it displays “OK!” and new pin will be applicable..
- - - - New pin is set.
To disable “PIN PROTECTION” function, there is no need to input any digit in both “NEW PIN”
and “CONFIRM”, press ENT directly to confirm. To enable “PIN PROTECTION” again, simply
set new pins with digits
During these operations, press key ESC to exit the PIN setting menu.
【
Note
】
In non-menu status, quickly lock function can be realized by simply pressing SHIFT +
ENT . “USER PIN”or “ADMIN PIN” is required for operation the controller again.
OK！
CONFIRM:
NEW PIN：
OLD PIN：
