6
ioSafe 216 at a Glance
No.
Article Name
Location
Description
1)
Power Button
Front Panel
The power button is used to turn the ioSafe 216 on or off.
To turn the 216 on, press and release the power button. The LEDS will start
flashing. The system is ready when you hear a beep.
To turn off the ioSafe 216, press the power button and hold it until you hear a
beep sound and the Power LED starts blinking.
2)
Copy Button
Front Panel
The Copy button lights up when you connect a USB Device to the USB port on
the front panel. Pressing the button will copy the data from the connected USB
device to ioSafe 216’s internal HDD.
3)
USB 2.0 Port
Front Panel
USB ports for adding additional external hard drives, USB printers, or other USB
devices.
4)
LED Indicators
Front Panel
The LED indicators are used to display the status of the internal disk and the
system. For more information, see "Appendix B: LED Indication Table" on Page
30.
5)
RESET Button
Back Panel
1. To restore IP, DNS, passwords for the
admin
account to default value.
2. To reinstall the ioSafe 216.
6)
Power Port
Back Panel
Connect the AC adapter to this port.
7)
USB 3.0 Ports
Back Panel
USB ports for adding additional external hard drives, USB printers, or other USB
devices.
8)
LAN Port
Back Panel
The LAN port for connecting network (RJ-45) cable to the ioSafe 216.
9)
Fan Back
Panel
To maximize cooling, please do not block the fan exhaust. If the fan is
malfunctioning, the system will beep.