6.
While holding the SSD down flat against the retaining bracket (Fig. 1), use a screwdriver to reinsert the
retainer screw back into the bracket and secure the SSD (Fig. 2).
1
2
7.
Repeat the steps above to install another SSD into the second slot if needed.
8.
Replace the bottom cover and secure it in place using the screw you removed in Step 3.
9.
Turn the ioSafe 1520+ back over and reconnect the cables you removed in Step 1 (see
Connecting the ioSafe 1520+, page 16
).
10. Follow the instructions for configuring your SSD Cache in DSM Help on the DSM desktop.
3.4. REPLACE MEMORY MODULES
Follow these steps to remove, install, or check a memory module on your ioSafe 1520+.
1.
Shut down your ioSafe 1520+. Disconnect all cables connected to your ioSafe to prevent possible
damage.
2.
Turn the ioSafe 1520+ over so that it is upside down.
ioSafe 1520+ User Manual
14
Summary of Contents for 1520+
Page 1: ...ioSafe 1520 User Manual ...
