8.
You may optionally use the round magnet provided to attach and store the hex tool on the back of the
unit.
3.3. M.2 NVME SSD CACHE INSTALLATION
You may optionally install up to two M.2 NVMe SSDs into the ioSafe 1520+ to create an SSD cache volume
to boost the read/write speed of a volume. You can configure the cache in read-only mode using one SSD
or either read-write (RAID 1) or read-only modes (RAID 0) using two SSDs.
NOTE
The SSD Cache must be configured in Synology DiskStation Manager (DSM). Please refer
to the section for SSD Cache in DSM Help on the DSM desktop.
TIP
ioSafe recommends that you configure the SSD-cache as read-only. The drives in a RAID
5 mode are faster than the cache at sequential read and write operations. The cache only
provides a benefit with random read and write operations.
1.
Shut down your ioSafe 1520+. Disconnect all cables connected to the ioSafe 1520+ to prevent possible
damage.
2.
Turn the ioSafe 1520+ over so that it's upside down.
ioSafe 1520+ User Manual
12
Summary of Contents for 1520+
Page 1: ...ioSafe 1520 User Manual ...
