49
Appendix E. Polar Alignment using iPolar Electronic PolarScope
Connect iPolar to a PC and Download iPolar Software
(1) Connect the iPolar Electronic Polar Scope to your PC USB port;
For CEM70G, plug a USB cable into the USB3.0 port on the rear end of mount RA axis or on
the mount base panel to connect the iPolar to a computer.
or
For CEM70/CEM70EC, plug a USB cable into the iPolar port on the rear end of mount RA axis
to connect the iPolar to a computer.
(2) The iPolar driver will be automatically installed if it is the first time connecting to the computer;
(3)
You should see “iOptron iPolar” under Camera catalog in computer Device Manager;
to download iPolar software and save on your computer;
(5) The iPolar software needs Windows 7, 8.1, 10 or later version, 32 bit or 64 bit operation system,
with .NET Framework 4.8 or later version.
Please refer to iPolar #3339 product page for latest firmware and Instruction Manual:
https://www.ioptron.com/v/firmware/3339_iOptron_iPolar.exe
https://www.ioptron.com/v/manuals/3339_iPolarOperationManual.pdf
Summary of Contents for C704A0
Page 32: ...32...
