30
30
support@ionodes.com | www.ionodes.com | 450-696-1060
o
Encoder type
- Allows you to choose your profile type (H.264 or H.265)
o
Resolution
–
Select the video resolution (expressed in MP)
o
Frame rate
–
Select the frame rate (expressed in fps)
o
Target bit rate
–
Select the desired target bitrate (expressed in kbps)
o
Set Optimal Target Bit Rate
–
Sets an optimal value (based on IONODES experience) for the
target bit rate, considering the current resolution and frame rate
o
Intra interval
–
Defines the GOP (Group-Of-Pictures) size (expressed in number of frames)
o
Rate control
–
Select between Constant Rate or Variable Rate
o
Profile
–
Select the profile for H.264 or H.265
o
VBR aggressiveness
is unique to IONODES products and proposes various levels (disabled to
aggressive) of motion triggered rate control. The more aggressive the setting, the more
variation motion will have on the rate control. It is strongly suggested to disable VBR
aggressiveness for low bit rate scenarios (below 1Mbps) as this parameter may negatively
affect perceived video quality.
o
URL
–
displays the URL that can be used for direct streaming from this specific profile.
o
Multicast Assignation
–
This section will only appear if the Global Multicast setting is enabled.
It allows you to manually configure the Multicast IP & Port for the specific outgoing stream;
when the automatic setting is enabled the encoder will automatically assign the Multicast
IP & Port based on the global range defined under
Configuration > Network > Multicast
.
For the
tertiary profile
, the following settings are available:
o
Enable Encoder
–
Allows you to enable/disable the specific profile.
o
Encoder type
–
Only MJPEG is available here
o
Resolution
–
Select the video resolution (expressed in MP)