TO DRAIN WATER (Continuous Drainage)
You may use a hose with an inner diameter of 12mm for
continuous drainage:
1. Use a screwdriver to remove the knockout at the back. Attach
the hose to the connector through the hole.
2. The hose must lead to an appropriate drain at a downward
slope with no sharp bends.
Note:
1. Ensure the bucket is well fitted in position before inserting the hose.
2. Before removing the bucket, ensure that the hose is disconnected.
TO EMPTY THE BUCKET
1. When the bucket is full, the "FULL" LED lights and the unit stops
in a few minutes
2. Do not move the unit or remove the bucket, if the machine is still operating, as
water may leak, damage the unit or cause an electric shock.
3. To remove the bucket, pull it out gently by gripping the bottom of the bucket,
and lift carefully.
4. Remove the cover of bucket first, then pour the water away, clean the bucket and
restore the cover and the bucket to the correct position.
NOTE :
Clean the bucket with clean water if needed. Do not use detergent, solvent, abrasive
or hot water to avoid damage to the appliance.
Do not remove or damage the float in the bucket, or the unit cannot
work correctly.
The bucket cover must be well fitted in position.
The "FULL" Led lights if the bucket is not well in place.
Knockout
Hose
Pull bucket out
Lift by the handle Remove the cover Pour the water away
Restore the cover
and the handle
Restore the bucket
9
Summary of Contents for ion612
Page 16: ......