Battery Installation
LITHIONICS BATTERY, CLEARWATER, FL 33765 USA | PH: 727.726.4204 | FAX: 727.797.8046 | WEB: LITHIONICSBATTERY.com
The battery cables should be sized to handle the expected load. Refer to NEC Table 310.15(B)16 for the maximum
amperage based on the cable gauge size. Cable lengths in excess of 6 feet may require heavier gauge
wire to avoid unacceptable voltage drop.
For more information refer to the National Electrical Code for correct cable size, which can be located at www.nfpa.org The battery circuit
must be properly fused to handle the expected load and not to exceed the battery specifications.
After installation is complete, turn on the battery power by a short-press of the Power button. The LED
indicator should come on to confirm the battery’s state.
DO NOT connect multiple batteries
in series to get higher voltage as it
will damage the internal BMS.
DO NOT attempt to disassemble the
battery, as it could lead to
permanent battery damage and
voids your battery warranty!!!
A link to the battery installation manual is
listed at the back of this manual
19
