ION QUICK PLAY FLASH, Quick Start Manual

Page: 4 / 10

3
2
7
5 5
4
7 3
1
QUICKSTART GUIDE
BOX CONTENTS
o
Make sure that the items listed below are included in the box:
•
QUICK PLAY FLASH
•
Power adapter
•
USB Flash Drive
•
Software CD
•
USB Cable
•
Quickstart Guide
•
Safety Instructions & Warranty Information
o
READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
INTRODUCTION
QUICK PLAY FLASH
easily converts your treasured vinyl records into digital music using a standard USB flash drive.
QUICK PLAY FLASH can also connect to a computer through its USB port. We have included two software packages
to aid you in converting your vinyl recordings. You should install one of the following applications to take advantage of
computer recording:
EZ Vinyl/Tape Converter
(PC only) is the quickest and easiest way to turn your recordings into digital media.
EZ Vinyl/Tape Converter conveniently saves your recordings in your iTunes* library. Novice users may find this
application preferable. We have included a handy Software Quickstart Guide with step-by-step instructions on
software installation and operation.
EZ Audio Converter
(Mac only) is a basic converter application for Mac OS X and is ideal for novice users.
Please refer to the included Software Quickstart Guide for step-by-step instructions on software installation and
operation.
To install the software: simply insert the included CD into your computer and follow the on-screen instructions. After
you finish converting your vinyl, you can then burn to CD or load onto portable media devices.
Visit http://www.ionaudio.com/computer-optimization for more information on optimizing your computer for audio.
•
iTunes is a trademark of Apple, Inc., registered in the U.S.A. and other countries.
TOP PANEL
1.
45 RPM Adapter-
Use this adapter to play
your 45 RPM records.
2.
Platter –
Place your record here.
3.
Tonearm-
QUICK PLAY FLASH comes with
a ready to use pre-balanced tonearm and
cartridge. The tonearm can be raised and
lowered by hand, or by pressing the raise /
lower lever. Please note that the tonearm
needs to be moved away from resting
position (on the arm clip) for the turntable
motor to activate. When the tonearm is
placed back in its resting position, the
turntable motor will deactivate.
4.
Arm Clip –
This specially designed arm clip
secures the tonearm while at rest or when
not in use. The arm clip has been designed to remain in the up position while unlocked.
5.
Raise / Lower Lever –
Raises and lowers the tonearm.
IMPORTANT:
Remove the plastic cartridge cover
(needle cover) before operating the turntable.