manualshive.com logo in svg

ION iDM02, Manual

Share
Download
ION iDM02 Manual Download Page 21

 

19

 

 

Page 3: Set Pad Volume (Volume) 

 
The display shows 

VOLUME

, the currently 

selected pad number, and the volume of the 
sound assigned to that pad.  

 

To change the volume associated with a 
given pad: 
 
1.

 

Press the pad (the display will show the 
pad number).  

2.

 

Enter the desired volume, from 00 (full off) to 99 (maximum volume), with the 
number or INC/DEC buttons. 

3.

 

When the display confirms your choice, either store the edits you've made or do 
more assignments by tapping another pad to select it, then assigning the pad 
volume. 

 

Page 4: Set Pad Stereo Position (Panning) 

 

The display shows 

PANNING

, the currently 

selected pad number, and the pan position 
assigned to that pad. (Note the cute little 
arrows indicating pan position; they move 
when you pan the drum sound.) 
 
To change the pan position associated with 
a given pad: 
 
1.

 

Press the pad (the display will show the pad number).  

2.

 

Enter the desired pan position, from full left to full right, using either the number or 
INC/DEC buttons. The seven available pan positions correspond to the number 
buttons shown in parenthesis: hard left (1), soft left (2), left of center (3), center (4), 
right of center (5), soft right (6), and hard right (7). 

3.

 

When the display confirms your choice, either store the edited Drum Set or do more 
assignments by tapping another pad to select it, then assigning the pan position. 

 

Page 5: Set Pad Tuning (Tuning) 

 

The display shows 

TUNING

, the currently 

selected pad number, and the tuning 
assigned to that pad. 

 

To change the tuning associated with a 
given pad: 
 
1.

 

Press the pad (the display will show the 
pad number). 

2.

 

Enter the desired tuning with the INC/DEC buttons. The range is from +3 (most 
sharp) to 0 (normal pitch) to -4 (most flat).  

3.

 

When the display confirms your choice, either store the edits or do more 
assignments by tapping another pad to select it, then assigning the new tuning. 

 

Summary of Contents for iDM02





































Reviews:

No comments

Brands by name

Popular brands

Load more brands