Camera Properties:
9
MyoCam-S Hardware Manual
Triggering
The Triggering group allows you to configure multiple MyoCam-S cameras to operate in a
master/slave relationship so that images acquired between the two cameras are phase-locked.
Master
Camera generates all timing and clocks required for operation.
Ext. Trigger - If selected the MyoCam-S outputs signals needed to
provide timing and clock signals to a 2nd, slave, MyoCam-S
Slave
Camera uses timing and clock signals from first, master, MyoCam-S.
Master/Slave and Ext Trigger options do not currently work, Contact IonOptix for
more information.
General Purpose Clock
The General Purpose Clock group allows a synchronization clock signal to be output on the CLK
OUT BNC on the
front panel
of the
Power Supply
.
Counter
Divisor value from the 24MHz crystal
Rate
Resulting output clock frequency for the entered Counter value
Version Information
Firmware
MyoCam-S firmware version
FPGA
MyoCam-S programmable logic code version
Board
MyoCam-S board version
Camera ID
Unique camera ID value
Debug Output
Dumps a raw image for debugging purposes.
2
1
Summary of Contents for MyoCam-S
Page 1: ...Hardware Manual MyoCam S ...
