Iomega STORCENTER px12-350r User Manual Download

Page: 130 / 166

●

Device IP Address

192.168.1.1

●

Port name

HTTP

●

Port number

Set to the same port value set on the Torrent Download page.

●

Protocol

TCP

Torrent Active Folders

Sharing Torrent Downloads with Other Peers

Torrent downloads allow you to share files using a peer-to-peer file sharing protocol. With Torrent
Download, you can download files using the torrent protocol to your px12-350r and then those files can be
uploaded by other torrent users.

Refer to

Managing Shares

on page 25 for more information on managing Shares and Active Folders.

Configuring a Torrent Active Folder

1. From the px12-350r Management Console, click Shares.

2. Select a Share to use as a Torrent Active Folder, and click to expand the Active Folder section.

3. Check Enable.

4. Select Torrent from the drop-down menu.

5. Click General torrent settings to set up Torrent settings. Refer to

Enabling Torrent Downloads

on previous page for more information on configuring your Torrent downloads.

6. Click Apply to save your changes.

7. Click View Content to see the files in this Share.

Adding Torrent Files to Your px12-350r

1. Open the Shares page.

2. Expand the Share that is enabled as a Torrent Active Folder. Any Share can be enabled as a

Torrent Active Folder. For information on enabling a Torrent Active Folder, refer to

Configuring a

Torrent Active Folder

above.

3. Copy the downloaded torrent file to the Torrent Active Folder Share. The torrent file immediately

starts to download to the Share. An administrator user can monitor its download progress on the

Torrent Download

page. All users can monitor the download progress through the

Content Viewer

on the Torrent Share.

Managing Torrent Downloads

In the Content Viewer, you can perform the following actions on torrents:

●

Pause or resume a torrent job. Click

to pause a torrent download. When a torrent download

is paused, you can resume the download by clicking

Media Management

120

Torrents

Summary of Contents for STORCENTER px12-350r







































































































































































Search results

Summary of Contents for STORCENTER px12-350r

Reviews:

Related manuals for STORCENTER px12-350r

Brands by name

Popular brands

Iomega STORCENTER px12-350r, User Manual

Search results

Summary of Contents for STORCENTER px12-350r

Reviews:

Related manuals for STORCENTER px12-350r

Brands by name

Popular brands