Iomega STORCENTER px12-350r User Manual Download | Manualshive

Page: 129 / 166

background image

Torrents

Torrent Overview

Torrent downloads allow you to share files using a peer-to-peer file sharing protocol. With torrent download
enabled, you can download files using the torrent protocol to your px12-350rand then those files can be
uploaded by other torrent users.

After you have added torrent jobs to your torrent share, the torrent download page displays a table of torrent
jobs, showing both downloads and files available for upload. Multiple torrent files can download
simultaneously. The table information includes the name of the file, its size, download or upload status,
and amount of time remaining for the torrent job to complete.

Enabling Torrent Downloads

1. On the Torrent Download page, click the switch on.

2. Click

Settings to modify the torrent download and upload settings.

3. In the Torrent Download Settings dialog box, enter a value for Maximum Download Speed. This

sets the rate at which files are downloaded to your device. The maximum download speed you
can enter is 2 MB/s.

4. Enter a value for Maximum Upload Speed.

This sets the speed at which other users can upload a file unprompted from your device. The
upload speed can affect device performance, so it is recommended that you choose a value that
does not strain the performance of your device and impact other work on it. The maximum upload
speed you can enter is 1GB/s.

5. Set a Port value used by torrent peers to upload files from your px12-350r.

The port value should be a number between 6881 and 6999, and your router must be configured to
allow port forwarding on the same port. Refer to

Configuring your router for torrent downloads

for

more information on how to do this.

6. Click Apply to save your changes.

Deleting torrent jobs

1. On the Torrent Download page, select a torrent you want to delete.

2. Click the

under the Action column to delete the torrent.

3. Click Yes to delete the torrent.

Configuring Your Router for Torrent Downloads

You must manually configure your router to forward a specific port to your px12-350r. Most routers refer to
this as port forwarding or application access, and it is recommended that you refer to your router's
documentation to learn how to set these values.

Port Information Used to Configure Your Router

The following information may be required to manually configure your router:

Forward the port to your px12-350r IP address identified in the table:

Media Management

Torrents

119

«
...
127
128
129
130
131
...
»

Summary of Contents for STORCENTER px12-350r







































































































































































Reviews:

No comments

Related manuals for STORCENTER px12-350r

Brand: ABB Pages: 66

Brand: Maco Pages: 38

Brand: LaCie Pages: 4

Brand: LaCie Pages: 4

AT-9424Ts/XP AC

Brand: Allied Telesis Pages: 3

LoadMaster 1500

Brand: KEMP Technologies Pages: 71

Brand: EnGenius Pages: 3

Brand: axing Pages: 52

Media Board D/120JCT-LS-EW

Brand: Dialogic Pages: 2

Brand: Moxa Technologies Pages: 36

Brand: Solwise Pages: 7

Brand: Patton Pages: 62

Brand: Intel Pages: 958

Brand: 3Com Pages: 53

Brand: iNetVu Pages: 20

Brand: Aaeon Pages: 119

Brand: Cypress Semiconductor Pages: 31

Brand: ST Pages: 67

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands