Iomega DataSafe Network Device User Manual Download Page 29

Page: 29 / 164

DataSafe NAS User’s Manual

To set or change the workgroup membership

of the DataSafe NAS

1. On the primary menu bar, click

Network Setup

2. On the Network Setup page, click

Identification

The Server Appliance Identity page (Figure 5) dis-
plays.

Figure 5

Server Appliance Identity

3. Select the

Workgroup

radio button and enter

the name of the workgroup to join.

4. If the DataSafe NAS belonged to a domain before

you joined the workgroup, the DataSafe NAS will
be disjoined from the domain and the computer
account will be disabled.

5. Click

6. You will be asked to reboot the DataSafe NAS. You

may accept the reboot, or cancel it.

If you click

, the DataSafe NAS will reboot and

a page will appear indicating that the unit is
restarting. After the DataSafe NAS is back online,
you must reinitiate your browser, then return to

Summary of Contents for DataSafe Network Device





































































































































































Search results

Summary of Contents for DataSafe Network Device

Reviews:

Related manuals for DataSafe Network Device

Brands by name

Popular brands

Iomega DataSafe Network Device, User Manual

Search results

Summary of Contents for DataSafe Network Device

Reviews:

Related manuals for DataSafe Network Device

Brands by name

Popular brands