Page 11 of 11
You can change the WiFi channel using the web browser interface
as follows:
1.
Connect to the microscope using a web browser (see
‘Connecting to the microscope’ above)
2.
Go to settings by clicking on the [gear] icon
3.
Click on [change WiFi channel]
4.
Select the [WiFi channel] to want to use
5.
Wait for the microscope to change to the new WiFi
channel.
6.
Your device may disconnect from the microscope WiFi
network. Check that it is still connected to the
iolightxxxxxx WiFi network using the WiFi settings on
your device.
You can use a WiFi network analyser app on a laptop or Android
device to scan the WiFi environment for a WiFi channel with less
interference.
After changing the WiFi channel with a web browser, the new
WiFi channel will work with the web browser, iPhone, iPad and
Android apps.
Can I use the web browser interface
on an iPad, iPhone or Android
device?
Yes, but for normal use the app will be much better. Z Stack
images will not work on many phones or tablets.
Using the web browser interface on a phone or tablet does allow
you to use features that are not available on the apps. For
example changing the WiFi channel.
I can’t see the high resolution setting
in the Settings app on iPhone or iPad
Close the Apple Settings app by double tapping the home button
to show the open apps, then scroll to the Settings app and close it
by swiping the app upwards off the screen. Open the Apple
Settings app again from the home screen of the device.
9.
Contact
If you have any questions, please contact ioLight at [email protected]
