IOGear MiniView Ultra+ GCS1758 User Manual Download Page 47 | Manualshive

Page: 47 / 54

background image

8. Plug the switch’s power adapter cable back in. This

completes the Firmware Upgrade Recovery
operation, and your switch is ready for use.

1. Unplug the switch’s power adapter cable.

2. Slide the

Firmware Upgrade Recovery Switch (see

p. 8) to the Recover position.

Firmware Upgrade Recovery

There are basically two conditions that call for
firmware upgrade recovery:

• When you begin a firmware upgrade, but decide

not to proceed with it.

• When the Mainboard firmware upgrade fails.

Note: If one of the cascaded switches fails to
upgrade successfully, unplug it from the installation
and perform the recovery and upgrade operation
independently. After it has been successfully
upgraded, plug it back into the installation.
To perform a firmware upgrade recovery, do the
following:

3. Use the Firmware Upgrade Cable (provided with

this unit), to connect to a serial port on your
computer with the Firmware Upgrade Port of the
switch.

4. Plug the switch’s power adapter cable back in.

5. Follow the upgrade procedures that begin with the

Starting the Upgrade section (p. 39).

6. After the upgrade completes successfully, unplug

the switch’s power adapter cable, once again.

7. Slide the

Firmware Upgrade Recovery Switch back

to the Normal position.

44

Firmware Upgrade Utility

«
...
45
46
47
48
49
...
»

Summary of Contents for MiniView Ultra+ GCS1758























































Reviews:

No comments

Related manuals for MiniView Ultra+ GCS1758

Brand: H3C Pages: 13

Brand: H3C Pages: 207

Brand: H3C Pages: 62

Brand: Kramer Pages: 8

Brand: Abtus Pages: 15

Brand: Cross Technologies Pages: 20

Matrix DFE-Gold 4G4202-60

Brand: Enterasys Pages: 78

Brand: ZENEC Pages: 16

Brand: KCC Pages: 6

Brand: Icy Box Pages: 6

Brand: Cabletron Systems Pages: 120

Brand: MuxLab Pages: 32

S6520X-EI Series

Brand: H3C Pages: 34

NEXT-POE4210L2S-TP

Brand: Synology Pages: 15

Brand: FCI Pages: 78

Brand: cable matters Pages: 12

Brand: NETGEAR Pages: 8

Brand: Omega Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands