IOGear MiniView Ultra+ GCS1758, User Manual

Page: 30 / 54

OSD Overview
The On Screen Display (OSD) is used to handle all
computer control and switching procedures. All
procedures start from the OSD Main Menu. To pop up
the Main Menu, tap the [Scroll Lock] key twice.
Note: You can optionally change the Hotkey to the Ctrl
key (see
OSD Hotkey, p.32), in which case you would
tap [Ctrl] twice. With this method, the [Ctrl] keys must
be on the same side (both left, or both right).
The OSD incorporates a two level (Administrator /
User) authorization system. Before the OSD Main
Screen comes up, a dialog box appears that asks
you to provide your Username and Password. If the
Password Function has been set (see p. 33), you
must provide them in order to access the OSD Main
Screen. If this is the first time that the OSD is being
run, or if the password function has not been set,
simply press [Enter] when the authorization dialog
box appears. The OSD Main Screen comes up in
Administrator Mode, with access to all functions.
When you invoke the OSD, a screen similar to the
one below appears:
27
OSD Operation