17
Auto Scan Mode
You may also switch ports on the KVM by doing
the following:
1.
Invoke Hotkey Mode
2.
Press and release the
[A]
key
Once scanning begins, it continues until you
press the [Esc] or [Spacebar] to exit.
NOTE:
While Auto Scan mode is in effect,
ordinary keyboard and mouse functions are
suspended.
Alternate Hotkey Invocation Keys
In case the default Hotkey Mode invocation keys
(Num Lock and Minus) are not optimal in your
setup, you may change them to Ctrl and F12,
respectively.
To switch the Hotkey Invocation Keys, do the
following:
1.
Invoke Hotkey Mode
2.
Press and release
H
3.
This will change the Hotkey Invocation key
to Ctrl and F12 (instead of Num Lock and
Minus).
NOTE:
This procedure is a toggle between the
two methods. To revert back to the original HSM
invocation keys, repeat the above procedure.
