Port Switching
There are two ways to access the computers in your
KVM setup:
·
Manual switching – pressing the push-buttons
on the unit’s front panel
·
Hotkey switching – entering commands from
the keyboard
Manual Switching
1. Switch console only
- Press selection button
for
less than two (2) seconds to bring only the
KVM focus to the computer attached to its
corresponding port
2. Switch everything
- Press selection button for
longer than four (4) seconds to bring KVM,
Audio, and USB Hub focus to the computer
attached to its corresponding port.
3
.
Press and hold port
selection switches 1 and
2 for more than two seconds to start Auto Scan
Mode.
Tip:
To stop Auto Scan mode, simply press any of the
port selection switches on the KVM.
14
Operation
