Before you begin the installation:
• Turn off your TV and all HDMI devices. Ensure you have enough HDMI cables for all devices and there are
enough electrical outlets nearby to power all of your devices.
• Position your Transmitter and Receiver up to 100 feet away from each other*. Test the placement for a good
signal prior to permanently installing or mounting everything.
• For best performance and range, place the receiver where you have a clear view between the Transmitter and
Receiver. Do NOT install the Receiver unit behind/below the TV or other metal devices where wireless signal
may experience interference. Do NOT install the Transmitter unit behind/below the Media sources, cabinet or
other metal devices where wireless signal may experience interference.
• Do not block any ventilation openings or install near any heat sources such as radiators, AV receivers, stoves or
other devices that produce heat.
• The included devices shall not be directly exposed to any liquids.
Transmitter Setup
1. Connect your source devices to the
transmitter’s “HDMI IN” ports with
HDMI cables (not included). See
IR Blaster section for IR blaster
installation (optional)
2. For Two TV set-up, connect the
local TV to the transmitter’s
“HDMI OUT” for the
loop-through connection.
3. Connect the power adapter to
the DC socket of the
transmitter to power up the
transmitter. The power LED
blinks in blue initially to search
for the connection (when the unit
is powered off, the LED changes
to Red).
Receiver Setup
1. Connect your TV to the HDMI port of the receiver with the included HDMI cable. Please choose the
appropriate “HDMI” input source on your TV.
2. Connect the supplied power adapter to the mini USB port of the receiver to power up the receiver. If the kit is
in the Standby mode (Both transmitter and receiver POWER LEDs are solid red), press the POWER button
from either Transmitter or Receiver will turn on the whole kit.
3. During the boot-up, the POWER LED will blink in blue until the Transmitter and the Receiver are wirelessly
connected. This may take up to 20 seconds to establish the connection.
Basic Operation
1. Turn on your TV and select the HDMI source input to which the receiver is connected.
2. Turn on your source device and press the SOURCE button on the remote control or on the top of the
receiver / transmitter to select the specific source device (HDMI 1 or HDMI 2).
3. The POWER LED should stay in solid blue and you will see the video being broadcasted from your source
device. If not, please press “INFO” on the remote control and refer to the on-screen-display (OSD)
information below and troubleshooting section.
3
2
1
1
HD Set-top box
Blu-ray Player
Local loop-through HDTV
1
2
Remote HDTV
Installation
