If your GUH326 USB port has suddenly stopped working:
Please remove the USB device, the power connection and
USB connection to the computer for at least 30 seconds
then reconnect.
In the event the port sees a short circuit, the GUH326 internal
protection will disable the port until the USB device, the USB
connection to the computer, and the power supply are all
disconnected and then reconnected.
Contact
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit
www.iogear.com
for more product information
2. Visit
www.iogear.com/support
for live help and product support
IOGEAR
iogear.custhelp.com
www.iogear.com
Limited Warranty
Warranty Information
This product carries a 3 Year Limited Warranty. For the terms
and conditions of this warranty, please go to
http://www.iogear.com/support/warranty
Register online at http://www.iogear.com/register
Important Product Information
Product Model
Serial Number
Compliance Information
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment
and receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Operation - Charge & Sync
Troubleshooting
1. Your GUH326 can simultaneously charge and sync multiple
mobile devices, including iPad
®
.* Simply connect your
smartphone and/or tablet using the cable supplied by the
manufacturer to the GUH326.**
*Note: Simultaneous charge and sync compatible with
Lightning connector equipped models only.
**Note: 4 smartphones/tablets is the maximum number of devices
that can be charged simultaneously using the GUH326.
4
CE Compliance
This device has been tested and found to comply with the
following European Union directives: Electromagnetic Capability
(2004/108/EC), Low Voltage (2006/95/EC) and R&TTED
(1999/5/EC).
Caution!
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.