manualshive.com logo in svg

IOGear GHPU01, User Manual

Share
Download
IOGear GHPU01 User Manual Download Page 3

Thank you for purchasing one of the most user-friendly networking devices on the market. IOGEAR’s HomePlug to
USB adapters are first-class networking devices designed to network your computers at home (or in your small
office). This device allows you to set up your home network via the most pervasive medium in your house – the
home power lines. It is easy to set up, and it doesn’t require any additional wiring in the house.

To better serve you, IOGEAR offers an array of additional USB 2.0, USB 1.1, FireWire, KVM, and other peripheral
products.  For more information or to purchase additional IOGEAR products, visit us at www.IOGEAR.com

We hope you enjoy using your IOGEAR HomePlug to USB adapter, another first-rate connectivity solution from
IOGEAR.

©2002 IOGEAR.  All Rights Reserved.  PKG-M0023

IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc.  Microsoft and
Windows are registered trademarks of Microsoft Corporation.  IBM is a registered trademark of International Business
Machines, Inc.  Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc.  IOGEAR makes no
warranty of any kind with regards to the information presented in this document.  All information furnished here is for
informational purposes only and is subject to change without notice.  IOGEAR, Inc. assumes no responsibility for any
inaccuracies or errors that may appear in this document.

Welcome

Summary of Contents for GHPU01

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands