background image

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: 
This equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a residen-
tial area is likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense. The device complies 
with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this 
device must accept any interference received, including interference that may 
cause undesired operation.

FCC Caution:

 Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate this 
equipment.

CE Warning:

 This is a class A product. In a domestic environment this product 

may cause radio interference in which case the user may be required to take 
adequate measures.

Compliance Information

Summary of Contents for GCS1808H













Reviews: