IOGear CS1222TAA4 Manual Download Page 31

Page: 31 / 54

Security Target

Version 1.1

2022-03-08

5.2.5.4

Resistance to Physical Attack (FPT_PHP.3)

FPT_PHP.3.1

The TSF shall resist [

a physical attack for the purpose of gaining access to the

internal components, to damage the anti‐tamper battery, to drain or exhaust
the anti‐tamper battery

] to the [

TOE enclosure and any remote controllers

] by

the attacked component becoming permanently disabled.

5.2.5.5

Reliable Time Stamps (FPT_STM.1)

FPT_STM.1.1

The TSF shall be able to provide reliable time stamps.

5.2.5.6

TSF Testing (FPT_TST.1)

FPT_TST.1.1

The TSF shall run a suite of self‐tests [

during initial start

‐

up and at the conditions

[upon reset button activation]

] to demonstrate the correct operation of [user

control functions and

[active anti

‐

tamper functionality]

FPT_TST.1.2

The TSF shall provide authorized users with the capability to verify the integrity
of [

TSF data

FPT_TST.1.3

The TSF shall provide authorized users with the capability to verify the integrity
of [

TSF

5.2.5.7

TSF Testing (FPT_TST_EXT.1)

FPT_TST_EXT.1.1

The TSF shall respond to a self‐test failure by providing users with a [

visual

]

indication of failure and by shutdown of normal TSF functions.

5.2.6

TOE Access (FTA)

5.2.6.1

Continuous Indications (FTA_CIN_EXT.1)

FTA_CIN_EXT.1.1

The TSF shall display a visible indication of the selected computers at all times
when the TOE is powered.

FTA_CIN_EXT.1.2

The TSF shall implement the visible indication using the following mechanism:
easily visible graphical and/or textual markings of each source video on the
display, [

a button,

a panel with lights

Application Note:

The refined text

: “

easily visible graphical and/or textual markings of each

source video on the display”,

is added per the Video/Display Devices Module.

TD0539 clarifies that the mandatory selection (refined by the VI-Module) applies if the TOE fits the

Combiner Use Case selecting “multiple connected displays” in FDP_CDS_EXT.1.1.

The TOE does not fit

the Combiner User Case but rather selects

“multiple connected displays”

because some models support

dual-displays from a single source video feed. Therefore, the selection does not apply.

Summary of Contents for CS1222TAA4























































Search results

Summary of Contents for CS1222TAA4

Reviews:

Related manuals for CS1222TAA4

Brands by name

Popular brands

IOGear CS1222TAA4, Manual

Search results

Summary of Contents for CS1222TAA4

Reviews:

Related manuals for CS1222TAA4

Brands by name

Popular brands