SI-PEX20148 3
Hardware Installation
1. Turn off the power to your computer
2. Unplug the power cord and remove your computers cover
3. Locate an empty PCIe slot on the motherboard and remove the slot bracket.
Save the bracket and screw for later.
4. To install, carefully align the cards bus connector with the selected PCIe slot on
the motherboard. Push the board down firmly.
5. Fasten the card to the computer case with the bracket screw you previously
removed.
6. Connect the card to the Power Supply Unit via Molex connector.
7. Replace the computer cover and reconnect the power cord
Driver Installation
1. Insert the driver CD-ROM.
2. Find the Folder EJ168&188&198 on the CD-ROM.
3. Double click the “stepup.exe” application to automatically install the drivers.
4. When the driver installation is complete, restart your computer.
