IO-Power Technology Co., Ltd
1F,No.100, Jinzhu Rd., North Dist., Hsinchu City 30055, Taiwan
http://www.io-power.com.cn
e-mail:
Tel: +886 3 5429395 Fax: +886 3 5357297
Form No.
:
IOP-OAPA-001-001
5
/
14
Retention date
:
6Years
7. Standard Use Instructions
Boot
Press down the "Power" key until backlight is on and boot animation is shown.
IO-WPD-2409-D2 WiFi Phone will then automatically search network and are registered to
the SIP server. If the phone successfully searches an authorized network, it will show network
name and signal intensity on the screen. If no authorized network is found, the screen will show
absence of network, and the phone is unable to communicate signals.
Dialup
Press the numbers you want to dial when the phone is standby. Press the "return key" on
the right side to delete wrong numbers. Press "call key" to make the call.
Receive Call
Bell will ring when there is a call coming. If network supports, the screen will display caller’s
name and calling number (depending on whether relevant information is stored in your
phonebook). Press the "call key" to answer the call.
Reject Call
If you don't want to receive the incoming call, press the "hang-up key" to reject it.
End Call
Press "hang-up key" to end the call, or cancel the dialing.
Adjust Volume
Adjust volume through menu (set volume), or by pressing the "navigation key" during
conversation
Power off
Press down the "hang-up key" under standby mode until the phone is turned off.
Other
Enter the SMS function by pressing the upper navigation key.
Check received calls by pressing the lower navigation key.
Enter the function table by pressing the left navigation key.
Press the answer key to check dialed numbers.
Press the right soft key to check phonebook