IO-Power Technology Co., Ltd
1F,No.100, Jinzhu Rd., North Dist., Hsinchu City 30055, Taiwan
http://www.io-power.com.cn
e-mail:
Tel: +886 3 5429395 Fax: +886 3 5357297
Form No.
：
IOP-OAPA-001-001
10
/
14
Retention date
：
6Years
Enter this option, input the port number, and press the soft key on the left.
8.4.2.2 RTP
Choose among g.711a, g.911mu and g.729a protocols for voice coding.
Choose between RFC2833 and Inbound for dual tone multiple-frequency mode.
8.4.2.3. Emergency Call
Set the "push to alarm" function and alarm numbers.
8.4.2.4. Firmware update
This option is for local wireless upgrade of software.
Enter the server address option, input the address, select upgrade, and press the soft key on the
left.
8.4.2.5. Parameter download
Support bulk setting of parameters and download from server.
8.4.2.6. SNTP
To set parameters related to Internet time.
8.4.2.7. Tracker
To enable positioning function and set positioning parameters.
8.4.3. Internet protocol
Set IP network parameters by this option.
8.4.3.1. DHCP
If DHCP is enabled, DHCP server will assign an IP address to the phone.
Enter this option and enable or disable DHCP.
Note: It is required to set following IP address, subnet mask, default gateway and DN server
parameters only when DHCP is disabled.
8.4.3.2. IP address
Use this option to set the IP address of your phone.
8.4.3.3. Subnet mask
Use this option to set the subnet mask.
8.4.3.4. Default gateway
Use this option to set the IP address of gateway.
8.4.3.5. DNS server
Use this option to set DN server parameters.