ZP2-HC-ESP SPECIFICATIONS:
Enclosure:
Aluminum
Panel Dimensions:
Height: 8.0”
Width: 6.0”
Depth
2.25”
PC Board Mounting:
Individual Snap Track mounted to enclosure base
Operating Temperature Rating:
-40° F to 150° F
Operating Humidity:
5% to 90% RH non-condensing
Wiring:
18-gauge wire for all equipment and component
connections.
Time Delays:
3 minutes off between heating and cooling calls.
3 minutes off on high or low limit
20 minute time share
Thermostats:
Single Stage
Programmable or non-programmable
Auto or manual changeover
Sensors:
ZPA-DTS Discharge Temperature Sensor
NTC Type 3, 10K
@ 77° F, +/- 3% @ 77° F
Ω
FIELD WIRING TERMINALS:
Zone Thermostats:
C
24Vac (Common)
R
24Vac (Hot)
W
First Stage Heat
Y
First Stage Compressor
G
Fan
HVAC Equipment:
R
24Vac Equipment Hot
W
First Stage Heat
Y1
First Stage Compressor
G
Fan
High / Low Limit
DA
Land to ZPA-DTS
DA
Land to ZPA-DTS
Panel Power:
C
24Vac (Common)
R
24Vac (Hot)
Damper Outputs
PC
Power Close
C
Common
PO
Power Open
Pressure Sensor:
2
Land to ZPA-SPS
3
Land to ZPA-SPS
7
iO-06-1281-010818
HVAC Controls
Indianapolis, IN 46237
www.iohvaccontrols.com
For Technical Support Call Toll Free: 866-225-5032