3. Extract the sensor from the adjustable
support.
4. Pass the cable into the sensor housing.
5. Assemble the sensor housing to the adapter.
Assemble the sensor with the
MSK-101-BM adapter (sensor
directed to the left)
1. Using the prepared holes, direct the base of
the sensor as shown in the figure and fasten it
to the wall or to the junction box with two
screws (not provided). See "Perforated base
dimensions" on page 21.
2. Assemble the adapter to the base, passing the
cable with the wires coming out of the alarm
control unit into the adapter.
3. Unscrew the fastening screws on the pre-
assembled base of the adapter.
Installation and use
MSK-101-MM | Installation instructions v1.7 OCT 2018 | msk-101-mm_instructions_en_us v1.7 | © 2017-2018 Inxpect SpA
13