Special Cases:
Some phones like
GE 2-9487GE2-A , GE 2-9488GE2-A
and all
RCA
phones beep every few
seconds when the calls are placed on Hold and may not work properly in C2 or B2 settings ( the
beep may turn off the Hold Music in some cases)
in that case use the B1 setting or use the A settings and increase the volume a bit so that the beeps
are less noticeable to the callers.
If audio activates suddenly in A1 or A2 switch settings , your lines may be “too powerful”
Try A3
setting.
Digital Player Advanced Features:
USB Mp3 Player /repeater
Dual Banks
Single or multi tracks up to 99 tracks
External audio input
Tone Control, Bass Boost
Wall mount capability via two Keyholes
Package Content:
SX8800 unit
Power adapter 110/240v AC to 12v DC 200-500 ma
2 RJ-14 phone cords
User’s Manual
SD card 256 MB or Higher capacity
Adjusting Output VOLUME
If the On Hold audio volume is too low turn the VOLUME control clockwise; If it is too loud turn the VOLUME
control counter clockwise to desired level.
Connecting to a Computer:
Remove the SD card and insert it into an “SD card slot” normally found on most PC or laptops (use
a USB adapter in case the PC only has a USB port but not a SD card slot) or connect the player
itself to a PC USB port to access/update the SD card (the AC power adapter is not required in this
case).
After you make the connection it will be detected as “Removable Disk” , when you open “My
Computer” or “Windows Explorer”
Transferring files into SD card:
Select the file you want to transfer to the SD card and drag-and-drop it into the “Removable Disk”
that represents this device (right click on the file, copy, move the mouse to the “Removable Disk” ,
right click there and paste)
The player will play all the .mp3 files one by one before it auto repeats from the 1
st
file, You may
silence the .mp3 files you do not want to play by renaming them to “
file.ip3
” or just keep one .mp3
file in the SD card, i.e. move or delete the extra files you do not want to play from the SD card.
When the file is being transferred to SD card allow several seconds for it to finish transferring
before removing the SD card.
If you have a new SD card with new production in it,
Remove the Power 1
st
then “press in” the old SD card
so it snaps out, insert the new SD card and make sure
it snaps in, Reconnect the power and the playback
automatically starts.
P6
