background image

viii

Automatic Email Recording:

  

(This feature

 

is

 

available on SX8600E only)

SX8600E is the 1

st

 device in the world with an exclusive feature: 

“It can be

automatically recorded by playing an email”.

 The production audio emailed to you

from your dealer contains a “coded noise file” that automatically activates & then
stops the recording process (The RED Status LED light indicates recording is in
progress, the noise codes themselves will not be recorded), all other audio that you
play on your PC will not effect the SX8600E.

Volume setting for recordings

The recording volume is directly effected by the volume setting on your PC, we
recommend you set the media player volume to about 50% level, volume control &
wave to 100% . as follows:
Double click on speaker symbol (located on lower right hand side of your screen)
then adjust the Volume control and Wave to Maximum 100%

Automatic CD recording (CD Auto Load):

(This feature

 

is

 

available on SX8600E only)

SX8600E can automatically be recorded from a PC CD ROM drive or a CD player,
Just insert  the CD you received from your dealer into the CD ROM drive of your PC
or insert it into your CD player (volume mid level ), press the play button on the CD
player and walk away.  The CD contains a code that starts the recorder in SX8600E
(RED Status LED turns ON) and then stops the recorder, the LED Green Status turns
back ON and play back resumes. The CD player stops on its own.

Adjusting Output VOLUME

If the On Hold audio volume is too low turn the VOLUME control clockwise; If it is too
loud  turn the VOLUME control counter clockwise to desired level.

Live audio from Radio etc..   input/output RCA jack

 

 

( 8

 )

If the Flash card is inserted, the big  RCA jack can be used to connect the head set
to monitor the audio content. 

(to connect a speaker to this RCA jack be sure to use a 5 inch

or smaller speaker to avoid overloading the out put beyond it’s limits).

  If the Flash card is

removed, the built in digital player turns OFF and this RCA jack can be used as
“input” for connection to an any Live audio source for the adapter function.

Manual Recording:

 Connecting to an external audio source:

(not available in model SX8600E)  

  

Connect the Audio IN jack to your audio source speaker or headphone jack using
the provided 3.5mm to 3.5 mm audio cord. Select the bank you want to record

1. 

Press REC to stop the playback, GREEN/ RED STATUS LEDs  Blink ON/OFF
continuously.

 

2. 

Start your music/audio, email MP3 file etc. Recording starts 

automatically 

 

(or

you may  press REC  to start recording manually if you prefer)

 
3. 

RED STATUS LED light turns ON solid to indicate recording in progress.

 

4.  Recording stops automatically after 15 seconds of silence in the end of

recording, the unit then removes the silences and resumes playback operation.

(You may also press REC to stop recording if you prefer to control it manually). 

RED

Status light turns OFF and Green Status will turn ON.

This   

Automatic Start / Stop:

. Feature on SX8600 allows you to

 just start the

audio and walk away

no need to watch the unit for end of recording.

The device automatically starts it’s normal playback, and will play what you just
recorded repeatedly.  If you need to re-record  repeat the above steps.

 

AUDIO IN

    Audio source

    PC, CD player, ipod,...

Volume control   Wave

Volume

50

Not Mute

Windows Media Player

Volume setting

Note on PC audio connection:

  You may use male to female extension audio

cords  or other methods if you need to extend the length of the connecting cord

(Maximum  audio cord length 500 feet)

  MIC

 

IN

 BANK

1     2

REC

P9

Optional  for user
recordings

P8

RCA

100%

                   Refer to page P8 to adjust your volume levels

Summary of Contents for SX8600









Reviews: