When choose “led”, and press “SETUP” enter to LED auto running parameter setting. The option with black marks is
selected.
You could choose e-Auto
（
LED auto running
）
or e-Manul (manual adjust the LED)
When choose “e-Auto”, press “SETUP” button enter the menu
Press “UP” and “DOWN” to select the parameter. When choose “Speed”, press setup to choose the speed menu of the auto
running.
Press “UP” and “DOWN” to adjust the auto running speed from 01-20
When choose “Freq.”, press “SETUP” to set the flash speed.
Press “UP” and “DOWN” to adjust the flash speed 00-20Hz
When choose “e-Manul”, press the “SETUP” to choose the LED single color, press the “UP” or “DOWN” to change the
single color.
Press the “SETUP” again to set the LED flash frequency, press the “UP” or “DOWN” to change the flash frequency value.
2)
Bar function
Choose “Bar”, press the “SETUP” to set the parameter.
You could choose m-Auto (bar auto running mode) and m-Manul (manual to adjust the bar position).
When you choose “m-Auto”, press “SETUP” to set the bar speed 01-16
When you choose “m-Manul”, the bar stops rotating. Press “SETUP” to set the Bar lock position
Choose “L-BAR”, press “SETUP” to set the left bar position through “UP” and “DOWN” When it is 90 °
，
the bar is in the
horizontal position. The same method to set the right bar.
2.
Build-in program
When display shows this menu, it enter to the build-in program
